Sharp SF-2530 Operation Manual page 73

10-BIN STAPLE SORTER (SF-S54N)/ 20-BIN STAPLE SORTER (SF-S56)
Stapling location
SORT
STAPLE
SORT
GROUP
1 2
5
4
7 8
LECT
0
START
9
Using the ADF or RADF
1 Set the originals in the document feeder tray face up
with the stapling position in the upper left corner.
SF-S54N
If the number of copies to be delivered into each bin is more than
30 for 5-1/2" x 8-1/2", 8-1/2" x 11" or 8-1/2" x 11"R paper or 15
for 8-1/2" x 14" or 11" x 17" paper, the copies will not be stapled.
SF-S56
If the number of copies to be delivered into each bin is more than
50 for 8-1/2" x 11" or 8-1/2" x 11"R paper or 25 for 8-1/2" x 14"
or 11" x 17" paper, the copies will not be stapled.
(ORIGINALS)
EVEN NUMBE
ODD NUMBER 2 Press the SORTER key to select the STAPLE SORT
mode.
Make sure that there is no paper in any sort bin before selecting
the STAPLE SORT mode.
PRE-COUNT
ORIGINALS
3 Set the number of copies.
3
Up to 10 sets (SF-S54N) or 20 sets (SF-S56) can be made.
6
9
C
4 Press the START key.
When copying and sorting are completed, each set of copies will
be automatically stapled.
Sets of copies containing copies of different width will not be
stapled.
71