Sharp SF-2530 Operation Manual page 7

1
2
Paper size plate
Changing the lower paper tray's inner cassette
The lower paper tray can accommodate five different paper sizes. To
change the paper size, simply change the inner cassette. (The inner
cassettes are optional.)
1 Gently lift and pull out the lower paper tray.
2 Grasp the inner cassette tabs and remove the cassette.
3 Remove the cover of the inner cassette to be installed.
If the cassette is empty, fan the copy paper and place it
in the cassette.
The cassette holds 500 sheets of 20 lb. bond paper.
(For 5-1/2" x 8-1/2" sized paper, the maximum is 250 sheets.)
Do not load paper above the maximum height line.
Place the cover on the inner cassette which was removed.
4 Place the inner cassette into the tray.
Position the inner cassette so its four protrusions fit into the
holes of the paper tray.
Inner cassettes are available for five different paper sizes:
5-1/2" x 8-1/2", 8-1/2" x 11", 8-1/2" x 11"R, 8-1/2" x 14", and
11" x 17".
Place the paper size plate in the front of the paper tray.
5
The paper size indication which shows through the slot on the
front of the copier should match the selected paper size.
6 Push the lower paper tray firmly back into the copier.
LOADING COPY PAPER
5