Sharp SF-2530 Operation Manual page 42

AUDITING PROGRAMS
Program No. 12: Account number change
Program No. 12 is used to change account numbers. When program
No. 12 is entered, an account number will appear in the copy quantity
display.
If no account number has been registered, "2E" will appear in the
copy quantity display for approximately 5 seconds. Enter another
program number or press the
POWER SAVE
ZOOM
100%
POWER SAVE
1 2 3
4 5 6
7 8 9
0
C
Program No. 13: Account number deletion
Program No. 13 is used to delete accounts. When program No. 13 is
entered, "0" will blink on the right side of the copy quantity display.
If no account number has been registered, "3E" will appear in the
copy quantity display for approximately 5 seconds. Enter another
program number or press the
POWER SAVE
1 2 3
4 5 6
7 8 9
0
C
POWER SAVE
ZOOM
100%
40
key to exit the auditing program.
1. Use a ZOOM (
number to be changed.
START
2. Press the START key.
"––" will appear in the copy quantity display.
3. Enter a new account number using the 10-key pad.
4. Press the START key.
START
If a number that is already registered or "000" is entered, the
number will blink in the copy quantity display for approximately
5 seconds. Then, "– – " will appear again to prompt account
number entry.
5. To continue with the same or other auditing programs,
enter the desired program number. To exit the auditing
program mode, press the
key to exit the auditing program.
1. To delete an individual account, press key 0 on the 10-
key pad.
To delete all accounts, press key 1.
START
2. Press the START key.
If you have pressed key 0 in step 1, an account number will
appear in the copy quantity display. Proceed to step 3.
If you have pressed key 1, all account numbers will be deleted.
Proceed to step 5.
3. Use a ZOOM (
number to be deleted.
4. Press the START key.
START
The specified account will be deleted.
5. To continue with the same or other auditing programs,
enter the desired program number. To exit the auditing
program mode, press the
, ) key to select the account
key.
, ) key to select the account
key.