Sharp SF-2530 Operation Manual page 60

ADF (SF-A17)/RADF (SF-A56)
1 2 3
4 5 6
7 8 9
TRAY SELECT
0
C
START
9
APLE
RT
OUP PRE-COUNT
ORIGINALS
58
3 Enter the desired number of copies.
The maximum number of copies in the two-sided copy mode is
INTERRUPT
50 for 8-1/2" x 11" and 8-1/2" x 11"R and 30 for 8-1/2" x 14" and
CLEAR ALL 11" x 17" paper. If the specified number of copies exceeds the
above number, the copy quantity display will display the maximum
allowable number after copying starts. If an optional sorter is
POWER SAVE
installed, the display will change to 10 (SF-S18 and SF-S54N)
START
or 20 (SF-S15 and SF-S56) after copying starts (in sort mode).
4 Press the START key.
To cancel a copy run during duplex copying, press the CLEAR
ALL (
duplex module following the procedure for removing misfed
paper from the duplex module. (See page 26.)
2-sided copies from 2-sided originals (SF-A56 only)
An optional duplex module must be installed for 2-sided copying.
1 Adjust the original guides to the size of the originals and
set the originals face up in the document feeder tray.
2 Use the ORIGINAL TO COPY key to select
1 2
LIG
) key. Manually remove any copies remaining in the
.