Savin 1075 Printer Reference page 63

Precaution on stapling
Limitation
❒ Stapling can be done only with the optional finisher installed.
❒ Stapling cannot be done when paper is fed from the bypass tray.
❒ Thick paper, OHP transparencies, and labeled paper cannot be stapled.
❒ You cannot interrupt the current job with a job for another function requiring
stapling or collating.
Note
❒ When the finisher is installed, and when an output tray that cannot output us-
ing the staple function has been selected, the paper will be output according
to the System Settings.
❒ If you cannot make staple settings even with the finisher installed, options
may not be set up correctly in the printer driver. Correct option settings in the
printer driver. For details, see the printer driver's Help.
❒ When duplex printing is selected, adjust staple positions to the binding direc-
tion.
❒ When the finisher is being used for another function's job (for example, a copy
job), printing will start after the current job ends.
❒ When setting "Staple" in the printer driver settings, make sure that a collate
option is not selected in the print settings of the application. If a collate option
is selected in the application, printing will not occur as intended.
❒ Be sure to set the paper size and orientation in the printer driver when sta-
pling.
• Depending on the software you are using, print settings may not be saved
and the printed result may not be as expected.
❒ Do not pull out paper until stapling has completed as this may cause a paper
jam. When paper jams occur, check the error message on the display panel of
the machine and remove the paper. If a paper jam occurs, see the General Set-
tings Guide.
❒ When printing restarts after removing the jammed paper, the printing posi-
tion may be different depending on the location of the paper jam.
• If the paper jam occurred in the optional finisher, printing will restart from
the top page of the data currently being printed, or from the page on which
the paper jam occurred.
• If the paper jam occurred in the machine, printing will restart from the
page on which the paper jam occurred.
❒ Even if the paper jam occurred in the machine, the error will not be cleared
unless the cover of the finisher is opened and closed.
Staple
6
59