Table of Contents
Advertisement
Machine Status and Configuration
You can check the machine status and configuration using telnet or UNIX.
❖ ❖ ❖ ❖ telnet
Use the info or status command.
❖ ❖ ❖ ❖ UNIX
Use the lpr or lpstat command, or stat or info parameter of rsh, rcp, or ftp.
Reference
For more information, see "Remote Maintenance by Telnet (mshell)", the
Network Printing Guide provided as a PDF file on the CD-ROM labeled
"Operating Instructions".
machine status
Status
Ready
Panel Off Mode
Energy Saver Mode
Warming Up
Error: Parallel I/F
Error: NVRAM
Error: DIMM
Error: HDD
Error: Ethernet
Error: IEEE1394
Error: IEEE802.11b Card
Error: IEEE802.11b Card or Board
Error: USB I/F
Low: Toner
Replace Cleaning Web
Nearly Full: Waste Toner
In Use: Staple Unit
In Use: Input Tray
Malfunction: Tray X
Error & Status Messages on the Display Panel
Description
Normal operation
Panel Off mode
Energy Saver mode
Warming up
Parallel interface board error
Contents of the memory unit are damaged.
DIMM has a problem.
Hard disk drive has a problem.
Ethernet board has a problem.
IEEE 1394 board has a problem.
IEEE802.11b card is not inserted when the ma-
chine is turned on or has been removed.
IEEE802.11b card or board has a problem.
USB interface board has a problem.
Toner is almost empty.
Clearing web is soon full.
Waste toner is soon full.
Staple unit is in use.
Paper tray is in use.
Paper cannot be fed from tray X. An error has
occurred in tray X. (X is the number of the
tray.)
4
31
Advertisement
Table of Contents
