Table of Contents
Advertisement
Troubleshooting
Status
Images are print-
ed in the wrong
orientation.
The printed image
is different from
the image on the
computer's dis-
play.
No transmission
4
when you use
1394 interface con-
nection
Printing stops and
a paper error is
displayed if the
custom size paper
in the paper feed
tray is specified
when printing
with the Post-
Script 3 printer
driver.
When connecting
the machine using
the USB2.0 inter-
face, the first page
of a print job that
contains a large
volume of data is
printed, and the
rest of the pages
are not printed.
Note
❒ If the problem cannot be solved, contact your sales or service representative.
42
Possible Causes, Descriptions, and Solutions
The feed direction you selected and the feed direction selected in the print-
er driver's Option Setup might not be the same. Set the machine's feed di-
rection and the printer driver's feed direction same.
See the printer driver's Help.
With certain functions, such as enlargement and reduction, the layout of
the image might be different to that on the computer display.
You might have selected to replace True Type fonts with machine fonts in
the printing process.
To print an image similar to the image on the computer display, make set-
tings to print True Type fonts as an image.
See the printer driver's Help.
Check using the following procedure.
A
Confirm the IEEE 1394 interface cable is connected securely.
B
Restart the computer.
If the error occurs even after executing the above operation, go to the
following steps.
C
Unplug the IEEE 1394 interface cable connected to the computer.
D
Run the utility tool for the IEEE 1394 Interface Board, which is stored in
the following path on the CD-ROM labeled "Printer Drivers and Utili-
ties".
\UTILITY\1394\
Reference
For more information about using the utility tool for IEEE 1394, see
the README file in the same directory on the CD-ROM.
E
Restart the computer.
Follow the one of the procedures below.
• Press [Job Reset] on the display panel to stop printing. Set the custom
size paper in the bypass tray, and then start printing.
• Select the paper feed tray with custom size paper, and then press [Con-
tinue] to force printing.
Confirm that "USB Printing Support" is installed on your computer.
Reference
See "Installing the Printer Driver Using USB", Printer Reference 1.
Advertisement
Table of Contents
