Appendix; Finisher - Savin 1075 Printer Reference

Finisher

You can collate, staple or punch holes in printed paper by installing the optional
finisher on this machine. Make sure to read the following precautions when us-
ing the optional finisher.
Reference
For information about optional finishers, see the General Settings Guide.
To use the staple function, see p.58 "Staple".
To use the punch function, see p.61 "Punch".
❖ ❖ ❖ ❖ Make sure to set the options installed on the machine in the printer drivers.
Reference
To set options in the printer drivers, see the Printer Reference 1.
❖ ❖ ❖ ❖ Make sure to set the paper size and paper orientation in the printer driver when using
duplex printing, combine (layout), staple and punch functions.
Reference
For information about duplex printing and combine (layout), see the print-
er driver's Help.
To use the staple function, see p.58 "Staple" and the printer driver's Help.
To use the punch function, see p.61 "Punch" and the printer driver's Help.
Note
❒ Depending on the application, print settings may not be enabled and the
printed output may not be as expected.
❖ ❖ ❖ ❖ When setting staple or collate in the printer driver, make sure that "Collate" check
box is cleared in the print settings of the application.
If "Collate" is enabled in the application, printing will not occur as intended.

6. Appendix

57