Table of Contents
Advertisement
Status
It takes too much
Photographs and other data intensive pages take a long time for the ma-
time to complete
chine to process, so simply wait when printing such data.
print job.
Changing the following settings with the printer driver may help to speed
up printing.
• PCL 6/5e
• PostScript 3
• RPCS™
See the printer driver's Help.
The data is so large or complex that it takes time to process. If the Data In
indicator is blinking, data is being processed. Just wait until printing re-
sumes.
If "Warming Up..." appears on the display panel, the machine is warming
up. Wait for a while.
It takes too much
The data is so large or complex that it takes time to process. If the Data In
time to resume
indicator is blinking, data is being processed. Just wait until printing re-
printing.
sumes.
The machine was in Energy Saver mode. To resume from Energy Saver
mode, it has to warm up, and this takes time. To disable Energy Saver
mode, select "Off" for "Energy Saver 1" in the System Settings menu. See
the General Settings Guide.
Paper is not fed
When you are using a Windows operating system, printer driver settings
from the selected
override those set using the display panel. Set the desired input tray using
tray.
the printer driver.
See the printer driver's Help.
Solid lines are
Make the following settings with the printer driver.
printed as broken
• Change the [Dithering] setting under the [Image Adjustments] tab in the
lines.
See the printer driver's Help.
Optional compo-
You have to configure the option setup in printer properties when bidirec-
nents connected to
tional transmission is not enabled.
the machine are
See the printer driver's Help.
not recognized
when using Win-
dows 95/98/Me,
Windows
2000/XP, and
Windows NT 4.0.
Possible Causes, Descriptions, and Solutions
Select the lowest value for [Resolution] on the [Print Quality] tab in the
printer driver's dialog box.
Select the lowest value for [Gradation] on the [Print Quality] tab in the
printer driver's dialog box.
Select "PostScript (optimize for speed)" for PostScript output format on
the [PostScript] tab in the printer driver's dialog box.
Select the lowest value for [Resolution] on the [Image Adjustments] tab in
the [Change User Settings] dialog box on the [Print Quality] tab in the print-
er driver's dialog box.
Select "Speed" for [Print priority] on [Print Quality] tab in the printer driv-
er's dialog box.
[Change User Settings] dialog box, under the [Print Quality] tab in the
RPCS™ printer driver's dialog box.
Other Printing Problems
4
41
Advertisement
Table of Contents
