Error Message - Roland C-330 Owner's Manual

Error Message

Error Message
Write Data Error.
Write Error.
Media Unavailable.
Media Full.
Read Error.
Read Data Error.
Load Over Run.
Memory Full.
MIDI Buffer Full.
MIDI Off Line.
MIDI Error.
System Error.
USB Over Current.
Meanings
You can only read the music file.
It can not be saved.
An error occurred during writing.
The external media's protect tab may be in the "Protect" (writing prohibited) position,
or the external media may not yet be initialized.
No external media is inserted.
Insert the external media and try again.
There is not sufficient free memory in the save destination.
Either insert other external media or delete unneeded files and try again.
An error occurred during writing.
The external media may be corrupted.
Insert other external media and try again.
Alternatively, you can initialize the external media.
The file is unreadable.
The data format is not compatible with the C-330.
Data was not called up in time for playback of the song.
After waiting several seconds, you may be able to play back the song by pressing the [PLAY/PAUSE] button again.
The internal memory capacity of the C-330 is full.
The C-330 cannot deal with the excessive MIDI data sent from the external MIDI device.
Reduce the amount of MIDI data sent to the C-330.
A MIDI cable has been disconnected.
Connect it properly and securely.
A MIDI transmission error has occurred.
Check the MIDI cable and connected MIDI device.
There may be a problem with the system.
Repeat the procedure from the beginning.
If it is not solved after you have tried several times, contact the Roland service center.
The External Memory port was subjected to excessive current.
Make sure that there is no problem with the external media, then turn the power off, then on again.
75