General Controls: Interface - Korg pa 500 User Manual

will be set to zero, to avoid these tracks sound in the
wrong way. This way, the Upper 1 track (usually
the most important one for solo playing) will sound
with the needed effect, while the other Keyboard
tracks will just sound dry.
Lock–Style pane
Style Preferences
When locked, selecting a Performance or STS will
not change the value of parameters contained in
the Style Preferences pages. By default, it is
turned on.
(See "Preferences: Style Preferences" on page 99,
and "Preferences: Style Play Setup" on page 100).
Bass Inversion
When locked, selecting a Performance or STS will
not change the Bass Inversion status. Bass Inver-
sion can be assigned to the Assignable Switch or
the Assignable Pedal.
(See "Bass Inversion" on page 86, "ASSIGNABLE
SWITCH" on page 11 and "PEDAL connectors"
on page 17).
Manual Bass When locked, selecting a Performance or STS will
not change the Manual Bass status.
(See "MANUAL BASS" on page 12).
Fill Mode When locked, the selected Fill Mode will not
change when selecting a different Performance or
Style.
(See "Fill Mode (1...3)" on page 97).
Style Element When locked, selecting a different Style does not
cause selecting a different Style Element.
Style Tracks Play/Mute Lock
When closed, this lock prevents a Style or Perfor-
mance change to modify the Play/Mute status of
the Style tracks. This way, you can, for example,
turn the bass track off during a whole show, to
allow your bassist to play it live. Also, you could
mute all Acc tracks, to only play with the Drum
and Bass tracks.
(See "Track status icons" on page 85).
Style Tracks Volume
When this lock is closed, the volume of the Style
tracks remains unchanged when a different Style
or Performance is selected.
Global edit mode

General Controls: Interface

This is useful if you create your own Styles, and
like to dynamically adjust the volume by using
the sliders as a mixer. It is not recommended with
Factory Styles, each one already mixed at its best
right at the factory.
General Controls: Interface
This page contains parameters related to the way messages are
shown in the display.
Help Language
Language
Use this pop-up menu to select one of the available languages for
the interactive help system.
Change button
Press this button to apply the selected language to the interactive
help system.
How to select the Help language
1. Since Pa500 must be reset at the end of this procedure, be
sure to first save all unsaved data.
2. While in this page, select a language from the pop-up
menu.
3. The Change button will start flashing. Press it.
4. You will be asked if you want to save the Global, and select
the new language. Press Yes to confirm. The Global will be
automatically saved, and the language selected.
5. A message will advice you to reboot the Pa500. Press OK to
close the message window.
6. Turn the Pa500 off, then on again.
Program Change
Show Program Change number
Check this parameter to show Program Change numbers next to
Sound names in the Sound Select window. By default, this
parameter is turned on.
Note: Program Change numbers are always shown in Sound Edit
mode, and in the various Track Info areas.
205
Gbl
Gbl