Recording - Korg pa 500 User Manual

72 Recording a new Song

Recording

Recording
1
Select the Style Element you wish to use before starting to play.
Select one of the Intros to start with an introduc-
tion. Select any of the Variations before starting
2
Start recording, by pressing the START/STOP button.
3
Play as if you were performing live with the Styles.
During recording, select any Style Element (Intro, Variation, Fill, Ending...) you like. You can
also press START/STOP to stop the Style, and press it again to start the Style up again!
Please remember that, while recording in Backing Sequence Record mode, you cannot use the
SYNCHRO, TAP TEMPO/RESET, ACC/SEQ VOLUME controls.
4
When finished recording your Song, press the
the SEQUENCER 1 section to exit recording, and return to the main page
of the Sequencer mode.
5
While in the main page of the Sequencer mode, press the
STOP) button in the SEQUENCER 1 section to listen to the recorded Song.
The Backing Sequence Song has been converted to an ordinary Song. If you like it, you can save
it to a card, and read it in Song Play mode, or with any external sequencer.
6
To edit the Song, press MENU to enter the Edit mode (see instructions
starting from page 186).
to record.
After pressing the PLAY/STOP button, the
main page of the Sequencer mode appears
(PLAY/STOP) button in
again.
(PLAY/
i
Note: If you do not
wish to start the Song
with the Style playing,
you can simply start
recording by pressing
the PLAY/STOP
button in the
SEQUENCER 1 section,
and start the Style only
later. The Style will start
at the next beginning of
the measure.