Korg pa 500 User Manual page 47

4
Select a Bank and Performance location in memory, where you would
like to save the Performance.
A)
B)
5
When you have changed the name to the Performance, and selected the
target location, press OK to save the Performance to memory (or cancel
to stop the operation).
Selecting and saving Performances
Set of banks. [1/8] corresponds to the top
row of Performances on the control panel,
or...
[9/16] to the lower row.
Press one of the side tabs to
select a different Performance
bank.
Saving your settings to a Performance
To select the target Bank and
Performance location, select
the Bank and Performance
parameters, and use the
TEMPO/VALUE dial.
The selected Perfor-
mance location is
highlighted. Press a
Performance's name
to select it.
Note: A Performance
can be saved to an
'Empty' location. An
'Empty' locations
currently contains
no data.
Press one of the lower tabs to
select a different Performance
page.
!
Warning: Saving a
Performance
already
overwrites any existing
data at that location.
The old data are lost.
Make a backup of all
your important data.
43
to an
used location