Korg pa 500 User Manual page 220

216 Media edit mode
Load
User data appears (Global, Performance, SongBook,
Sounds, Style...).
4. Select the folder containing the type of data you are looking
for, and press Load to confirm your selection.
Note: Data loaded from a card, and data already in memory
are merged. For example, if there is data in all two USER
Style banks in memory (USER01, USER02), and there is only
the USER01 Style bank on a card, the USER01 bank is over-
written, while the USER02 bank is left unchanged.
As a result, you will have a STYLE folder in memory contain-
ing the USER01 bank you just loaded, and the old USER02
bank.
Loading a single bank
You can load a single bank of User data (User Sounds, User
Styles, Performances) with a single operation. A bank corre-
sponds to a STYLE SELECT or PERFORMANCE/SOUND
SELECT button.
1.
Insert a card into the card drive. Its content will appear in
the display.
2. If the folder you are looking for is inside another folder,
select this latter and press the Open button to open it. Press
the Close button to go back to the parent folder.
3. Select the ".SET" folder containing the data you wish to
load, and press Open to open the ".SET" folder. A list of
User data appears (Global, Performance, SongBook,
Sounds, Style...).
4. Select the folder containing the type of data you are looking
for, and press Open to open the selected folder. A list of
User banks appears.
5. Select the bank you are looking for, and press Load to con-
firm the selection. A dialog box appears, asking you to
select one of the available User banks in memory.
In the page above, the previously selected Style bank will be
loaded into the bank 1 (USER1 button) in memory. The
existing Styles in memory will be deleted and overwritten.
6. Select the target bank, and press OK to load the source
bank.
Warning: After confirming, all User data contained in the
bank in memory is deleted.