Selecting And Using A Custom List; Selecting A Songbook Sts - Korg pa 500 User Manual

Selecting and using a Custom List

After creating one or more Custom Lists, you can select one and use it for your show.
1
Press the Custom List tab to select the Custom List page.
2
Use the List pop-up menu to select one of the available Custom Lists.
Use the List pop-up menu to
select one of the available Cus-
tom Lists.
3
Select one of the entries in the list (it turns black), then press the Select
button in the display to confirm selection. Press the PLAY button to start
playing back the selected Song.

Selecting a SongBook STS

Up to four STSs can be associated to any SongBook entry. It doesn't matter if it is based on a Style or a
Standard MIDI File.
1
Press the Lyrics/STS tab to open the Lyrics/STS page and see the four
STSs associated to the current SongBook entry.
2
Select the desired STS by pressing the corresponding SINGLE TOUCH SET-
TING button on the control panel. As an alternative, touch its name in the
display.
The STS is selected. Keyboard tracks settings may change.
Entry in play. To select a
different one, highlight
it and press the Select
button in the display.
Press Select to set the
highlighted entry to play
(if different than the
one automatically
selected).
Press Next to select the next entry in the list.
(This command can also be assigned to an
Assignable Switch).
STSs associated with
the current entry.
The SongBook
Selecting and using a Custom List
69