Korg pa 500 User Manual page 19

If you keep the SHIFT button pressed, and press one of
the buttons of this section (even if you are in Sound Select
mode), the "Write Performance" window appears in the display,
and you can save the current track settings into a Performance
(see "Write Performance dialog box" on page 102).
V
SEQUENCER 2 TRANSPORT CONTROLS
Transport controls for Sequencer 2. See instructions for
Sequencer 1 above.
W
STYLE CHANGE
This button turns the Style Change function on or off.
On When you select a Performance, the Style might
change, according to which Style number is
memorized onto the Performance.
Off When you select a Performance, the Style and
Style track settings remain unchanged. Only Key-
board track settings are changed.
X
PERFORMANCE SELECT
Press this button to use the PERFORMANCE/SOUND SELECT
section to select a Performance.
Y
SOUND SELECT
Press this button to use the PERFORMANCE/SOUND SELECT
section to select a Sound, and assign it to the selected track.
Z
UPPER OCTAVE
These buttons transpose the selected track in steps of a whole
octave (12 semitones; max ±2 octaves). The octave transposition
value is always shown (in octaves) next to the Sound's name.
Press both buttons together, to reset the Octave Transpose to zero.
Note: The Octave Transpose has no effect on tracks set to Drum
mode (and, even if set in a different status, on the Drum and Per-
cussion tracks).
– Lowers the selected track an octave.
+
Raises the selected track an octave.
You can jump to the Style Play > Tuning page by keeping
SHIFT pressed, and pressing one of the UPPER OCTAVE but-
tons.
[
SYNCHRO START / STOP buttons
These buttons turn the Synchro Start and Synchro Stop func-
tions on or off. This lets you decide if you must press START/
STOP to start and/or stop a Style, or just play the keyboard.
Start On, Stop Off
In this situation, just play a chord in the chord
recognition area (usually under the split point,
see "SPLIT" on page 16) to automatically start
the Style. If you like, turn one of the INTROs on
before starting the Style.
Start On, Stop On
When both LEDs are lit, raising your hands from
the keyboard momentarily stops the Style run-
ning. If you play a chord again, the Style starts
again.
Start Off, Stop Off
All Synchro functions are turned off.
\
TAP TEMPO/RESET
This is a double-function button, acting in a different way
depending on the Style status (stop/play).
Tap Tempo: When the Style is not playing, you can "beat" the
tempo on this button. At the end, the accompaniment starts
playing, using the "tapped in" tempo.
Reset: When you press this button while the Style is playing
back, the Style pattern goes back to the beginning of measure 1.
]
TEMPO LOCK
This button turns the Tempo Lock and Link Mode functions on
or off.
On When you select a different Style or Performance,
or select a different Song, the tempo does not
change. You can still manually change it, by using
the DIAL.
The Link Mode is also turned on for the Song
Play mode. Tempo is the same for both Sequenc-
ers.
Off When you select a different Style or Performance,
or select a different Song, the memorized tempo
SB
is automatically selected.
The Link Mode is also turned off for the Song
Play mode, so each Sequencer plays with its own
Tempo.
You can jump to the Global > Lock page by keeping
SHIFT pressed, and pressing the TEMPO LOCK button.
`
FADE IN/OUT
When the Style or Song is not playing, press this button to start
it with a volume fade-in (the volume goes from zero to the max-
imum).
When the Style or Song is playing back, press this button to stop
it with a volume fade-out (the volume gradually decreases).
You don't need to press START/STOP or PLAY/STOP to start or
stop the Style or Song.
Note: This does not work in Sequencer mode.
You can jump to the Global > Basic page by keeping
SB
SHIFT pressed, and pressing the FADE IN/OUT button.
a
SONGBOOK
Press this button to recall the SongBook mode. While in this
mode, you can browse through the music database.
You can jump to the SongBook > Custom List page by
keeping SHIFT pressed, and pressing the SONGBOOK button.
b
ENSEMBLE
This button turns the Ensemble function on or off. When on,
the right-hand melody is harmonized with the left-hand chords.
Note: The Ensemble function works only when the keyboard is in
Split mode.
Front panel 15
SB