Program Change Messages Used As Remote Commands; Control Change And Program Change Message Used As Remote Commands - Korg pa 500 User Manual

274 MIDI Data

Program Change messages used as remote commands

Program Change messages used as remote commands
The following is a table including all Program Change messages, used as remote Style and Sequencer controls. These messages are to be
sent on the Control channel (see "MIDI: MIDI In Channels" on page 209).
PC Function
Style Elements
80 Intro 1
85 Variation 3
90 Ending 1
Style and Sequencers Control
93 Fade In/Out
98 Single Touch
Note: The above Program Change numbers are given according to the 0-127 numbering system.

Control Change and Program Change message used as remote commands

The following is a table including all Control Change + Program Change messages, used as remote Style and Sequencer controls. These
messages are to be sent on the Control channel (see "MIDI: MIDI In Channels" on page 209). If a Style is already selected, just send the
Program Change message.
CC#0
The same as the Style to which the STS belongs
PC Function PC
81 Intro 2 82
86 Variation 4 87
91 Ending 2 92
94 Memory 95
99 Style Change 100
CC#32 PC
64
Function PC Function
Intro 3/Count In 83 Variation 1
Fill 1 88 Fill 2
Ending 3
Bass Inversion 96 Manual Bass
Start/Stop (Style) 101 Play/Stop (Seq 1)
STS PC STS
STS 1 65 STS 2
PC Function
84 Variation 2
89 Fill 3/Break
97 Tempo Lock
102 Play/Stop (Seq 2)
PC STS PC STS
66 STS 3 67 STS 4