Korg pa 500 User Manual page 223

Saving the full memory content
You can save the full memory content with a single operation.
1. Insert a card into the card drive.
2. The full content ("All") of the internal memory is already
shown. Select it, and press Save to confirm the selection.
The list of files in the card is shown.
3. At this point, you can:
• Press the New SET button and create a new ".SET" folder
(see "Creating a new ".SET" folder" on page 221), or
• Select an existing ".SET" folder.
4. Press Save to confirm. A dialog box appears, asking you to
select the type of data to save:
In the above dialog box, check all data type you wish to save
to a card.
5. Press OK to confirm, or Cancel to abort.
Warning: After confirming, all data of the selected type in the
target folder is deleted.
Media edit mode
Saving all data of a specified type
In addition to the above, you can save all data of a specified type
by selecting the corresponding folder.
1. Insert a card into the card drive.
2. The full content ("All") of the internal memory is already
shown. Select it, and press Open to open it. A list of User
data types appear (each type is a separate folder).
3. Select the folder containing the type of data you wish to
save, and press Save To to confirm the selection. The list of
files in the card is shown.
4. At this point, you can:
• Press the New SET button and create a new ".SET" folder
(see "Creating a new ".SET" folder" on page 221), or
• Select an existing ".SET" folder, and press Save to confirm.
Warning: After confirming, all data of the selected type in the
target folder is deleted.
219
Save