Jukebox Panel - Korg pa 500 User Manual

152 Song Play operating mode

Jukebox panel

Track names
Under the sliders, a label for each track is shown. Use the TRK.
SEL button to switch between the various track views.
UPPER1...3 Upper tracks.
LOWER Lower track.
T01...T16 Song tracks. [*]
[*] Volume for these tracks is not memorized.
Jukebox panel
When a Jukebox (JBX) file is assigned to Sequencer 1, you can
use the list shown in this panel to browse the Jukebox list, and
press the Select button in the display to select a Song to play. This
way, you can select any Song in the list as your starting Song, and
manually change the order of the Songs to play.
Note: A Jukebox file can be assigned to Sequencer 1 only.
Note: This panel is only available after loading a Jukebox file.
Hint: To create or edit a Jukebox file, go to the Jukebox Edit page
(see page 160). A quick way to create a Jukebox list is to press the
"Play All" button in the Song Select window (see page 79).
Warning: If you delete a Song included in the Jukebox list currently
in play, the sequencer will stop, and the "No Song" message will
appear. At this point, you can select the JukeBox tab to open the
Jukebox panel, and select a different Song.
As an alternative, you can select the next Song by pressing SHIFT +
>> (FAST FORWARD) in the SEQUENCER 1 section of the con-
trol panel, then press (PLAY/STOP) in the SEQUENCER 1
section again.
Song list Selected Song
Song list
Use this list to browse through the Songs in the Jukebox list. Use
the scrollbar to scroll the list.
Selected Song
Name of the Song currently in play. You can select a different
Song from the list, and press the Select button in the display to
select it for playback.
Select button
Press this button to select the Song highlighted in the list, and
assign it to Sequencer 1. If a Song is already playing, it will be
stopped, and the selected Song will start playing back.
Jukebox file
Name of the selected Jukebox file. To edit this file, see "Jukebox
Editor" on page 160.
Transport controls for the Jukebox
When you select a Jukebox file, Sequencer 1 transport controls
work in a slightly different way than with single Songs.
<< and >>
(HOME)
Jukebox file
Pressed alone, these buttons are the Rewind and
Fast Forward commands.
Keep the SHIFT button pressed, and press
these buttons to scroll to the previous or next
Song in the Jukebox list.
Returns to measure 1 of the current Song.
(PLAY/STOP)
Starts or stops the current Song. When you stop
the Song, it is stopped at the current position.
Press HOME to go back to measure 1 of the cur-
rent Song.
If the Jukebox panel is open, you can select the
Song from which to start. See "Jukebox panel"
above.