When The Error Is Displayed After End Of Sewing; When The Rest Switch Is Not Displayed - JUKI AMS-210EN/IP-420 Instruction Manual

(2) When the error is displayed after end of sewing

(3) When the rest switch is not displayed

When a large slip is detected, the reset switch is not displayed.
1 Release the error.
When RESET button
released, the sewing screen is displayed.
2 Perform sewing work again from the start.
When the pedal is depressed, sewing starts.
A
1 Turn OFF the power.
– 95 –
A is pressed, and the error is