Performing Pattern Button No. Selection; Selection From The Data Input Screen - JUKI AMS-210EN/IP-420 Instruction Manual

2-17. Performing pattern button No. selection

(1) Selection from the data input screen

A
F
C
1 Display the data input screen.
In case of the data input screen (blue), it is possible to select
the pattern button No. In case of the sewing screen (green),
press READY switch
2 Call the pattern button No. selection screen.
When PATTERN BUTTON NO. SELECTION button
is pressed, the pattern button No. selection screen is dis-
played. Pattern button No. which is selected at present and the
contents are displayed on the upper part of the screen, and the
list of the pattern button No. buttons which have been regis-
tered is displayed on the lower part of the screen.
3 Select the pattern button No.
When UP or DOWN SCROLL button
pattern button No. button C which have been registered are
changed over in order. The contents of sewing data which
D
have been inputted in the pattern button No. are displayed in
the button. Here, press the pattern button No. button C you
desire to select.
B
4 Determine the pattern button No.
E
When ENTER button
No. selection screen is closed and the selection is finished.
However, the pattern buttons which are registered to the com-
bination sewing cannot be deleted.
* When you desire to delete the pattern button which has been
registered, press DELETE
tern buttons which are registered to the combination sewing
cannot be deleted.
* For the pattern No. to be displayed, press FOLDER SELEC-
TION F button and pattern button Nos. which have been
stored in the specified folder are displayed in the list. When the
folder No. is not displayed, all pattern Nos. which have been
registered are displayed.
– 59 –
to display the data input screen.
B is pressed,
D is pressed, the pattern button
E button. However, the pat-
A