Installing The Belt Cover; Adjusting The Belt Tension; Cleaning - JUKI TSC-441 Instruction Manual

4. INSTALLING THE BELT COVER

WARNING :
To avoid possible personal injury due to abrupt start of the machine, turn off the power to the machine and check to be sure
that the motor has totally stopped rotating in prior.

5. ADJUSTING THE BELT TENSION

WARNING :
To avoid possible personal injury due to abrupt start of the machine, turn off the power to the machine and check to be sure
that the motor has totally stopped rotating in prior.
Handwheel

6. CLEANING

WARNING :
To avoid possible personal injury due to abrupt start of the machine, turn off the power to the machine and check to be sure
that the motor has totally stopped rotating in prior.
1. Install two belt cover supports ❶ to the machine arm.
2. Install belt cover B ❷ to belt cover supports ❶ using screws ❸ .
3. Hook the V belt on the handwheel.
4. Attach belt cover A ❹ to belt cover B ❷ using screws ❺ .
5. Fix belt cover A ❹ on the table using wooden screw ❻ and washer ❼ .
Adjust the belt tension with the height of the motor so that the belt sags
10 mm when the center of V belt is applied with a 9.8 N load.
Motor pulley
– 2 –