Video Recording; Surround Effect - Pioneer ELITE VSX-99 Operating Instructions Manual

VIDEO RECORDING
Refer to the connection procedures on pages 7 to 9 and refer to
the VCR's Operating Instructions regarding proper operation
procedures. Recording can be performed on both VCR 1 and
VCR 2.
1. Select the source you want to record from with the input
selector buttons.
eWhen recording from a LaserDisc on VCR 1 or VCR2 LD
eWhen recording from the TV tuner on VCR 1 or VCR 2
—> TV/SAT
@When recording from VCR 1 on VCR 2 VCR 1
@When recording from VCR 2 on VCR 1 > VCR 2
eWhen recording on VCR 1 or VCR 2 from a component
connected to the front panel VIDEO INPUT jacks ~ VIDEO
SURROUND EFFECT
2. Start recording on the VCR.
For VCR, select a line input (external! input).
3. Start playback on the component selected with the input
selector buttons.
The volume, balance and tone controls have no effect on the
recording.
NOTE:
When recording with VCR 1, be sure the input selector is set to
a position other than VCR 1. When recording with VCR 2, be sure
the input selector is set to a position other than VCR 2.
GUI operation enables easy copying from a LaserDisc to VCR 1
(or 2), and copying between VCR 1 and VCR 2. (Refer to page 30.)
1. Select the desired mode with the DOLBY PRO-LOGIC button,
DSP MODE button and AC-3 button.
The DSP MODE changes in sequence each time the DSP
MODE button is pressed. (The DSP MODE indicator lights.)
Taree DANCE ———* HALL
SIMULATED
off «———— THEATER <«——— SURROUND
ePress the DSP OFF button to switch the DSP MODE off.
elf rear speakers are not selected during SPEAKER MODE
setting (page 31), pressing the DOLBY PRO-LOGIC button
selects DOLBY 3CH LOGIC.
20
<ARB7051>
2. Adjust levels to achieve a correct surround sound
reproduction.
This is done using GUI (page 26). For details concerning how
to perform level adjustment, refer to page 32.
You can set this unit to match the requirements and
specifications of your stereo system's speakers (whether or
not center speaker(s), rear speakers or a sub-woofer are
used, speaker size, etc.) to assure optimum sound quality.
Before using, perform settings in the SPEAKER MODE (refer
to page 31).
NOTE:
This unit does not feature conventional switching between
NORMAL/WIDE/PHANTOM center modes.