NordicTrack T9ci NTL09908.0 User Manual page 9

.
With the help of a second person, carefully tip
the treadmill onto its side as shown, Partially
fold the Frame (54) so the treadmill is more sta-
ble, Do not fully fold the Frame until the
treadmill is completely assembled.
Hold the Left Upright (111) against the Base
(85), with the bend in the Left Upright positioned
as shown, Slide the Left Base Cover (118) onto
the end of the Left Upright.
Attach the Left Upright (111) to the Base (85)
with two 3/8" x 2 3/8" Bolts (10) and two 3/8"
Star Washers (18); do not fully tighten the
Bolts yet.
Attach a Wheel (92) to an Extension Leg (90)
with a 3/8" x 2 3/4" Bolt (6) and a 3/8" Nut (5).
Do not overtighten the Nut; the Wheel must
turn freely.
85
118
Bend
111
54
.
Slide the Left Base Cover (118) over the Base
(85). Attach the Left Base Cover with three #8 x
3/4" Screws (1). Do not overtighten the
Screws.
With the help of a second person, tip the tread-
mill so that the Base (85) is flat on the floor.
1
118
.
Set the console assembly face down on a soft
surface to avoid scratching the console assem-
bly.
Identify the Left Accessory Tray (93) and the
Right Accessory Tray (94), which are marked
with an "L" and an "R" on the bottom.
Attach the Left and Right Accessory Trays (93,
94) to the console assembly with eight #8 x 5/8"
Screws (7). Do not overtighten the Screws.
93
94
Console
Assembly
9