How To Use An Ifit Card - NordicTrack T9ci NTL09908.0 User Manual

HOW TO USE AN IFIT CARD
1. Insert the key into the console.
See HOW TO TURN ON THE POWER on page 15.
Then, slide your finger across the screen to begin.
2. insert an iFit card and select a workout.
To use an iFit workout, insert an iFit card into the
iFit slot; make sure that the iFit card is oriented so
the metal contacts are face-down and are inserted
into the iFit slot.
iFit Card
iFit Slot
Next, select an iFit workout by pressing the iFit in-
crease and decrease buttons next to the iFit slot.
When an iFit workout is selected, the screen will
show the name, the maximum incline setting, the
total time, and the maximum speed setting of the
workout. In addition, a profile of the speed settings
of the workout will appear on the screen.
Each iFit workout is divided into several one-
minute segments. One speed setting and one in-
cline setting are programmed for each segment.
Note: The same speed and/or incline setting may
be programmed for consecutive segments.
3. Start the walking belt.
Press the Start button to start the workout. A mo-
ment after you press the Start button, the treadmill
will automatically adjust to the first speed and in-
cline settings of the workout. Hold the handrails
and begin walking.
During the workout, a personal trainer will guide you
through the workout.
If the speed or incline setting for the current seg-
ment is too high or too low, you can manually over-
ride the setting by pressing the speed or incline
buttons; however, when the next segment be-
gins, the treadmill will automatically adjust to
the speed and incline settings for the next seg-
ment.
To pause the workout at any time, press the Stop
button. To restart the workout, press the Start but-
ton or the Speed increase button. The walking belt
will begin to move at 1 mph. When the next seg-
ment of the workout begins, the treadmill will auto-
matically adjust to the speed and incline settings for
the next segment.
4. Follow your progress with the screen.
See step 5 on page 19.
5. Turn on the fan if desired.
.
See step 8 on page 18.
When you are finished exercising, remove the
key from the console.
See step 9 on page 18.
CAUTION: Always remove iFit cards from the
iFit slot when you are not using them.
24