The Information Mode; How To Adjust The Cushioning System - NordicTrack T9ci NTL09908.0 User Manual

THE INFORMATION MODE HOW TO ADJUST THE CUSHIONING SYSTEM
The console features an information mode that allows
you to select a unit of measurement for the console
and turn on or turn off the display demo mode. You
can also adjust the contrast of the screen and set the
date and time.
To select the information mode, hold down the Stop
button, insert the key into the console, and then release
the Stop button. When the information mode is se-
lected, the following information will appear on the
screen:
The screen will
show the selected
unit of measure-
ment. To change
the unit of mea-
surement, press
the Speed increase button. To view distance in miles,
select ENGLISH. To view distance in kilometers, select
METRIC.
UMITS: ENGLISH SET EUR_EHTTIME:
DEIMO: 011
"1, ae : 3q _M
EDNTRRET L£UEL t-tDD= tDD "JR nPR 2DnB
IHC UP, r'DWM TD Hr'JUST
The console features a display demo mode, designed
to be used if the treadmill is displayed in a store. While
the demo mode is turned on, the console will function
normally when you plug in the power cord, switch the
reset/off circuit breaker to the reset position, and insert
the key into the console. However, when you remove
the key, the displays will remain lit, although the but-
tons will not function. If the demo mode is turned on,
the word "ON" will appear on the screen while the infor-
mation mode is selected. To turn on or turn off the demo
mode, press the Speed decrease button.
To change the contrast of the screen, press the Incline
increase and decrease buttons.
You can also view the date and time. To set the date
and time, see step 5 on page 16.
To exit the information mode, remove the key from the
console.
Remove the key from the console and unplug the
power cord. The treadmill features a cushioning sys-
tem that reduces the impact as you walk or run on the
treadmill. To increase the firmness of the walking plat-
form, step off the treadmill and slide the platform cush-
ions toward the front of the treadmill. To decrease the
firmness, step off the treadmill and slide the platform
cushions toward the back of the treadmill. Note: Make
sure that both cushions are set at the same firm=
hess level. The faster you run on the treadmill, or
the more you weigh, the firmer the walking plat=
form should be.
Platform
Cushion
Decrease
Platform
Cushion
Walking Platform
26