NordicTrack T9ci NTL09908.0 User Manual page 8

.
Identify the Right Upright (112), which is marked
with a sticker. Have a second person hold the
Right Upright near the Base (85) as shown.
Slide the Right Base Cover (119) onto the end
of the Right Upright.
See the inset drawing. Tie the wire tie in the
Right Upright (112) securely around the end of
the Wire Harness (79). Then, pull the other end
of the wire tie until the Wire Harness is routed
completely through the Right Upright.
3
Wire
Tie
112
119
85
.
Hold the Right Upright (112) against the Base
(85), with the bend in the Right Upright posi-
tioned as shown. Be careful not to pinch the
Wire Harness (79).
Attach the Right Upright (112) to the Base (85)
with two 3/8" x 2 3/8" Bolts (10) and two 3/8"
Star Washers (18); do not fully tighten the
Bolts yet.
Bend
112
79
85
.
Slide the Right Base Cover (119) over the Base
(85). Attach the Right Base Cover with three #8
x 3/4" Screws (1). Do not overtighten the
Screws.
119
85
8