Safety Precautions (To Hide 3D Safety Precautions) - Panasonic TH-65VX300U Operating Instructions Manual

Item
Internal 3D Emitter
Display size
All Aspect
Auto Setup
Advanced Motion
Resolution
Power On Message
(No activity power off)
3D Safety Precautions
Memory lock
Set the infrared transmitter for the 3D Eyewear.
On: Use the infrared transmitter of the unit and the external 3D IR TRANSMITTER (available separately.)
Off: Use the external 3D IR TRANSMITTER (available separately.)
Adjusts the image display size on screen.
Off: Sets the normal image display size on screen.
On: Sets the image display size approximately 95 % of the normal image display.
Off
Notes:
• This setting is valid only when the input signals are as follows;
NTSC, PAL, SECAM, M.NTSC, PAL60, PAL-M, PAL-N (Video)
525i, 525p, 625i, 625p, 750/60p, 750/50p, 1125/60i, 1125/50i, 1125/24sF, 1125/25p, 1125/24p,
1125/30p, 1125/60p, 1125/50p, 1250/50i (Component Video, RGB, DVI, SDI, HDMI)
• When "Display size" is set to "On", "H-POS" and "V-POS" in "POS./SIZE" can be adjusted.
• Refer to each board's operating instruction for DVI, SDI, HDMI's corresponding signals.
Sets All Aspect mode (advanced aspect setting) or default aspect mode.
With each press of button, the aspect changes in the selected mode.
Off: Default aspect mode
On: All Aspect mode
Aspect mode of each setting is as follows:
(Example: HD signal)
Off 4:3 H-FILL ZOOM FULL JUST
On 4:3 (1) 4:3 (2) 4:3 Full Zoom1 Zoom2 Zoom3 16:9 14:9 Just1 Just2
Sets the operational mode of the automatic position adjustment in the POS./SIZE menu.
Manual: Automatic position adjustment starts when
position adjustment is executed from the POS./SIZE menu.
Auto: Other than remote control or menu operation, automatic position adjustment starts:
When the display power is turned ON.
When the input signal is switched.
Displays motion picture images at higher resolution.
On Off
Notes:
• Please set to "Off" if images look unnatural.
• This function is disabled during 3D images.
Whether to show/hide No activity power off Precautions at the time of power ON is set.
On: The warning precautions are shown at the time of power ON.
Off: The warning precautions are not shown at the time of power ON.
Note: This setting is enabled only if "NO ACTIVITY POWER OFF" is "ENABLE" (see page 43).
3D Safety Precautions show/hide is set during power ON.
On: 3D Safety Precaution is shown every time when the power is ON.
Off: 3D Safety Precaution is not shown when the power is ON.
When the setting changes from "On" to "Off", the con¿ rmation screen is displayed as below. Pressing
"YES" switches the setting.
Locks or unlocks saved pro¿ les. Also for setting passwords. (see page 38)
OPTIONS Adjustments
Adjustments
On
is pressed on the remote control or automatic
3D Safety Precautions
If Off is selected, the 3D safety precautions
will not be displayed when power is turned on.
Change Setting?
YES NO
61