A knock-out is provided on the left side of the fireplace for
routing the sheathed cable (romex) from the inside of the
firebox to the power heat duct. Use the strain relief
(included with the power heat duct) to secure the cable.
Cable to
Power Heat
Duct
Remove and discard the power heat
duct cover plate (one or both sides).
Molex Connector
(attached to the
wiring harness on
the fireplace)
Molex Connector (included with heat duct
kit) - use wire nuts to attach to the cable.
Remove and discard the circular cover
plate attached to the heat shield.