Table of Contents
Advertisement
NOTE: Use a magnetic-
tipped nutdriver on these
screws - take care to prevent
the screws from falling into
the fireplace.
Remove the 12 screws
securing the flue assembly.
Rotate the flue
assembly so the
flue points
upwards. Secure
using the twelve
screws removed
earlier.
DO NOT OVER-
TIGHTEN THE
SCREWS.
Attach the intake cover
plate with the screws
removed earlier.
Attach the cover plate with
the screws removed earlier.
NOTE: flatten the four legs
before insaling the cover
plate.
Advertisement
Table of Contents
