Table of Contents
Advertisement
Left Side Gas Inlet (preferred)
A 2" high by 3" wide opening is located
behind the gas inlet cover plate (it is 2"
above the base of the fireplace).
6-3/4"
You may remove this cover plate to
install the gas line. The cover plate has
a 7/8" diameter hole (covered with a
push plug). By rotating the plate 180°
the hole may be re-located. You may
also secure the plate in a customized
location using the self-drilling screws.
Right Side Gas Inlet
The Gas Inlet is
3/8" FPT
18"
The Gas Inlet is
3/8" FPT
A 2" high by 3" wide opening is located
behind the gas inlet cover plate (it is 1-3/8"
above the base of the fireplace).
A 12" flex tube and shutoff valve is
included with the fireplace. The shutoff
valve accepts a 1/2"MPT.
You may remove this cover plate to install the gas line. The
cover plate has a 7/8" diameter hole (covered with a push
plug) in line with the gas inlet on the gas control valve. By
rotating the plate 180° the hole may be re-located. You may
also secure the plate in a customized location using the self-
drilling screws.
A 12" flex tube and
shutoff valve is included
with the fireplace. The
shutoff valve accepts a
1/2"MPT.
6-1/4"
Advertisement
Table of Contents
