Table of Contents
Advertisement
If using a Fireplace Xtrordinair (FPX) arched face, see "Thick Facing with a Fireplace Xtrordinair Arched
Faces" on page 38.
Do not install masonry (or other
material) in front of the
fireplace. This area must remain
open to install the face.
TOP VIEW - Protruding Masonry
Framing
Nailing Bracket
Fireplace
Drywall
Masonry
TOP VIEW - Recessed Masonry
Framing
Fireplace
(or cement board, etc.)
Masonry
NOTE: The nailing brackets are not used for this type
of installation - secure the fireplace to the floor with
the brackets along the base of the fireplace.
Raised Fireplaces:
Masonry is installed 1" (maximum)
above the base of the fireplace.
Drywall
Floor-Mounted Fireplaces or Raised Hearths:
Build the hearth 1" (max.) above the base of the
fireplace. The fireplace may be raised to
accommodate thicker hearth materials.
Fiber Board (must remain in place)
FRONT VIEW
41"
1-1/2"
35-3/4"
1"
Advertisement
Table of Contents
