Table of Contents
Advertisement
Upgrade faces are available for this fireplace and may influence facing installation. Consult with your
Travis Dealer if you are using an upgrade face.
Do not install tile (or other material)
in front of the glass frame,
convection channel, or access panel
openings. This area must remain
open to access internal components
and for convection air.
TOP VIEW
Framing
Fireplace
Tile
NOTE FOR FPX FACES:
FPX arched faces require the FPX Face
Upgrade Kit (sku 98500686) and a
triangular piece of facing in these upper
corners. See the instructions included
with the face for further details.
2-7/8"
Facing is installed to this
edge of the fireplace.
Nailing Bracket
Drywall
7-7/8"
Floor-Mounted Fireplaces or Raised Hearths:
Build the hearth 1" (max.) above the base of the
fireplace. The fireplace may be raised to
accommodate thicker hearth materials.
Raised Fireplaces:
Facing is installed 1" (maximum)
above the base of the fireplace.
FRONT VIEW
37"
Fiber Board (must remain in place)
1-1/2"
1-1/8"
34-1/4"
1"
2"
Advertisement
Table of Contents
