Table of Contents
Advertisement
Correct
Flames should be blue at the
base, yellow-orange on the top.
There are two air shutters on this fireplace - adjust both air shutters to obtain the correct flame.
Move the controls left or right until the flame
looks correct. The rear air shutter affects
the rear portion of the burner, the front air
shutter the front portion of the burner.
Pushing to the left gives the flame more air,
making it more blue. Pushing to the right
gives the flame less air, making it more
orange.
NOTE: If the air control is all the way open,
yet the flames remain sooty, shut off gas to
the fireplace and contact a qualified gas
service technician.
Not Enough Air
If the flames are over 14" tall or sooty on
the ends, open the air shutter.
Too Much Air
If the flames are all blue and
short, close the air shutter.
Front Air Shutter
Control
MORE
AIR
NOTE: The logs must be installed correctly to
monitor the flame while adjusting the air shutter.
Rear Air
Shutter Control
LESS
AIR
Advertisement
Table of Contents
