System Overview; Q-1500D Series Led Home Theater Projection System Block Diagram - Runco QuantumColor Q-1500d series Installation & Operation Manual

The Q-1500d Series LED Home Theater Projection System consists of the following
components:
• The projector and optional CineWide with AutoScope equipment.
• A Primary DHD Controller unit that provides a video signal and on-screen display (OSD)
menu to the primary optical engine of the projector. In addition, the Primary DHD
Controller controls all of the other system components (projector, Secondary DHD
Controller and Brightness Acceleration Engine), in response to user input via its infrared
(IR) remote control unit or front-panel keypad, an external control system or HDMI
Consumer Electronics Control (CEC) messages.
• A Secondary DHD Controller unit that provides a video signal and OSD menu to the
secondary optical engine of the projector.
• The Brightness Acceleration Engine, which accepts video signals from multiple analog
and digital sources, multiplexes them and distributes them to the Primary and
Secondary DHD Controllers.
Figure 2-1 shows how these components connect to and interact with each other. The
following sections describe each one in detail.
Video
Remote Control
Sources
HDMI, Component, RGB, Composite
Figure 2-1. Q-1500d Series LED Home Theater Projection System Block Diagram
Q-1500d Series Installation/Operation Manual
HDMI
IR Audio Out
HDMI Primary
Primary
RS-232
DHD Controller
RS-232
HDMI Secondary
Secondary
RS-232
DHD Controller
Brightness
Acceleration
Engine

2. System Overview

Anamorphic
Lens
Projector
Primary
Optical Engine
Anamorphic
Lens
Secondary
Optical Engine
Trigger
7