Q-1500D/Cinewide With Shasta Anamorphic Lens Base Plate - Exploded View - Runco QuantumColor Q-1500d series Installation & Operation Manual

Q-1500d/CineWide with Shasta Anamorphic Lens: Figure 3-10 shows the Shasta
anamorphic lens base plate assembly for a Q-1500d/CineWide.
Rectangular
Spacer (2x)
Figure 3-10. Q-1500d/CineWide with Shasta Anamorphic Lens Base Plate -
Exploded View
To install the Shasta anamorphic lens base plate on a Q-1500d/CineWide:
1. Place the projector upside down on a blanket or other soft, flat surface.
2. Remove the two front feet from the projector.
3. Place the two rectangular spacers on the bottom of the projector as shown.
4. Place the CineWide base plate on top of the spacers.
5. Secure the base plate to the projector with the four (4) supplied, M5 x 0.8 x 20mm
Phillips screws.
DO NOT OVER-TIGHTEN THE SCREWS.
Caution
6. Re-attach the front feet to the projector.
Q-1500d Series Installation/Operation Manual
2
Screw, Phillips
Pan-Head,
M5-0.8 x 20mm (4x)
3
1 CineWide
Base Plate
for Shasta
Lens
35
Installation