Table of Contents
Advertisement
Table 7-3 lists the Q-1500d projector specifications.
Table 7-1. Q-1500d Projector Specifications
Projector Type:
Native Resolution:
Aspect Ratios:
DTV Compatibility:
Picture Size (16:9 Screen):
Processing:
Control Options:
Inputs:
12V Output (for anamorphic
lens transport):
Video Standards:
Calibration:
Color Gamut:
Throw Distance
(Factor x Screen Width):
Horizontal & Vertical Offset:
Light Output:
Contrast Ratio:
Illumination System:
Q-1500d Series Installation/Operation Manual
Texas Instruments Digital Light Processing™ (DLP) dual
imaging system, SuperOnyx™ DMD™
Full HD 1920 x 1080 (1080p)
4:3, Letterbox, 16:9, VirtualWide, Cinema, Virtual Cinema,
Native
Refer to Table 7-2
Recommended Width: 72- 132 in.
Maximum Width: 200 in.
Runco DHD4 Processor with ViVix IV™ technology and BRiC
(Backup, Recovery and Clone) tool
• Serial commands via RS-232
• Discrete infrared (IR) remote
• Consumer Electronics Control (CEC) protocol support via
HDMI
• Ethernet
Refer to Table 7-3
+12 VDC, rated at 250 mA
NTSC, PAL, SECAM, CEA-861D
ISF Certified Calibration Configuration
Fully adjustable, > BT.709 (REC709)
Refer to Table 3-3
Refer to Table 3-4
CSMS Specifications* – Home Theater Calibration:
900 ANSI Lumens; 58 Foot-Lamberts (fL)
Uncalibrated: 1400 ANSI Lumens
Light output will drop less than 10% over the life of the
product.
*Measured on a 1.3 gain, 72" wide 16:9 screen
CSMS* Contrast Ratio: 330:1
3 settings: Infinity:1, 20,000:1, and 10,000:1 (sequential)
ColorContrast™ for up to 50% higher contrast by color
InfiniLight™ LED (RGB) illumination system
7. Specifications
123
7.1
Q-1500d Projector
Specifications
Advertisement
Table of Contents
