Roland SPD-S Owner's Manual page 97

4: SYNC-DELAY (Sync Delay)
Adds a delay, the duration of which is specified in note length corresponding to tempo. The delay time can also be automatically
adjusted to the tempo of the wave that is played back. (Effect synchronization (Phrase Sync) -> p. 116)
Parameter Value
Tempo 20–260
PhraseSync OFF, ON
Beat
3
Feedback 0–98%
DelayLevel 0–127
In addition, if you press the PAGE buttons, "Knob," "Velo" and "Pedal" are displayed. You can then select the parameters to be
controlled with the EFFECTS CONTROL knob, the strength (velocity) used in hitting a playing surface, and the expression pedal.
Value Parameters controlled with Knob and Pedal (See the table above for details.)
OFF —
TEMPO Tempo
* Operation when set to TEMPO may produce some noise.
BEAT Beat
FEEDBACK Feedback
DELAYLEVEL DelayLevel
Value Parameters controlled with Velo (See the table above for details.)
OFF —
FEEDBACK Feedback
DELAYLEVEL DelayLevel
5: TAPE-ECHO
Emulates the effects of vintage tape echo units.
Parameter Value Descriptions
RepeatRate 0–127 Tape speed
Intensity 0–127 Amount of repetitions of the echo sound
EffectLevel 0–127 Volume of the echo sound
In addition, if you press the PAGE buttons, "Knob," "Velo" and "Pedal" are displayed. You can then select the parameters to be
controlled with the EFFECTS CONTROL knob, the strength (velocity) used in hitting a playing surface, and the expression pedal.
Value Parameters controlled with Knob, Velo and Pedal (See the table above for details.)
OFF —
REPEATRATE RepeatRate
INTENSITY Intensity
EFFECTLEV EffectLevel
Descriptions
Tempo
* You can also define the tempo by controlling the intervals at which you hit a pad
or depress a foot switch. (Tap Tempo: Ctrl SW in CONTROL SW in Setup Edit
-> p. 79)
Phrase sync switch. (Effect synchronization (Phrase Sync) -> p. 116)
Note length
3 3
* Settings that would result in a delay time in excess of two seconds are not per-
mitted.
Rate at which the delay sound is fed back
Volume level of the delay sound
Effect List
97