Parameters For Phrase Resampling - Roland SPD-S Owner's Manual

Chapter 5 Layering Performances to Make a Phrase (Phrase Maker)

Parameters for Phrase Resampling

Parameter Value
Gain 50%–400%
Mode MONO,
STEREO
Grade LONG,
STANDARD,
FINE
Dst
I001–399,
(Destina-
C001–500
tion)
If you hold down [SHIFT] and press [FUNC], the parameter is reset to its initial value.
Other Descriptions
Remain Displays the duration for which new sampling is possible (the remaining time). The duration varies depending on
the Mode and the Grade. This value is for indication only.
* The duration is indicated in units of minutes (m) and seconds (s) while [FUNC] is depressed in the parameter
setting.
66
Descriptions
Specify the gain applied to the original wave.
Select MONO or STEREO for the wave. If you select stereo, the wave has two voices.
Specify the grade of the wave.
LONG: produces a poorer sound quality than that of STANDARD, but consumes half the
memory space that STANDARD uses.
STANDARD: produces standard sound quality.
FINE: produces the highest sound quality but consumes double the memory space used by
STANDARD. Two voices are used in this grade.
Specify the wave number to which a created wave is to be saved.
I001–399: To the internal memory
C001–500: To the memory card
* By pressing [CARD], you can select the top number of the internal memory or of the mem-
ory card.
* If you press [SHIFT] and [FUNC], a new (empty) wave number is selected