Roland SPD-S Owner's Manual page 60

Chapter 4 Resampling an Existing Wave
6
Press [SAMPLE].
7
"select dest pad" appears. Hit a pad to select where the newly created
wave after resampling is to be assigned (the playing surface as the
resampling destination). You can select only one playing surface at a
time. After the assignment, you are automatically led to the next step.
When NOT assigning a newly created wave to any patch, press [SAMPLE] again
without hitting any playing surface pad.
8
"Resample Stby" (Resample Standby) appears. Pad indicators of the
pads selected in Step 7 are lit. Press the PAGE buttons to set the
following parameters. Press the PAGE buttons to change the
parameter, and press [-]/[+] to change the value.
See p. 62 for details on the parameters.
• Gain
• Mode
• Grade
• Type
• Auto End
9
Press [START/STOP] to start resampling. "Rec" is indicated.
When Auto End is set to ON in Step 8, resampling is automatically stops. When it is set
to OFF, press [START/STOP] again to stop resampling.
10
A "write?" indication is displayed. Assign a name to the wave. Press
the PAGE buttons to move the cursor under the name and press [-]/[+]
to change the character at the cursor position. When the name is
complete, press [ENTER] to save it.
A "now writing.." indication appears; it shows that a wave is being saved.
If you do not want to save the wave, press [EXIT], and you will return to the "Resample Stby"
screen in Step 8.
60
While [FUNC] is depressed in
Step 7, the patch name is
displayed. Press [FUNC] and
[-]/[+] before hitting a playing
surface to change the patch.
While [FUNC] is depressed,
the remaining time for
resampling ("Remain") is
displayed. (p. 62)
The parameters listed on the
left are returned to their
respective initial values when
resampling is finished.
If you turn the CONTROL
knob during resampling, the
effect is also recorded.
Do not power the SPD-S off
while resampling is in
progress.
If you press [START/STOP] or
hit a relevant playing surface,
you can check the resampled
sound.
Do not power the SPD-S off
while saving a wave.