Roland SPD-S Owner's Manual page 104

Effect List
14: 4BAND-PEQ (4-Band Parametric Equalizer)
Controls the levels at four frequencies.
Parameter Value
Freq1 50–16.0 kHz
Q1 0.5, 1.0, 2.0, 4.0, 8.0
Gain1 -12.0–+12.0 dB
Freq2 50–16.0 kHz
Q2 0.5, 1.0, 2.0, 4.0, 8.0
Gain2 -12.0–+12.0 dB
Freq3 50–16.0 kHz
Q3 0.5, 1.0, 2.0, 4.0, 8.0
Gain3 -12.0–+12.0 dB
Freq4 50–16.0 kHz
Q4 0.5, 1.0, 2.0, 4.0, 8.0
Gain4 -12.0–+12.0 dB
Total -12.0–+12.0 dB
In addition, if you press the PAGE buttons, "Knob," "Velo" and "Pedal" are displayed. You can then select the parameters to be
controlled with the EFFECTS CONTROL knob, the strength (velocity) used in hitting a playing surface, and the expression pedal.
Value Parameters controlled with Knob and Pedal
(See the table above for details.)
OFF —
FREQ1 Freq1
ALLFREQ Freq1, Freq2, Freq3, Freq4
Value Parameters controlled with Velo
(See the table above for details.)
OFF —
FREQ1 Freq1
GAIN1 Gain1
ALLFREQ Freq1, Freq2, Freq3, Freq4
ALLGAIN Gain1, Gain2, Gain3, Gain4
104
Descriptions
Center frequency 1
Range of Center frequency 1 (*The larger the value, the narrower the width)
Amplification/attenuation at the Center frequency 1
Center frequency 2
Range of Center frequency 2 (*The larger the value, the narrower the width)
Amplification/attenuation at the Center frequency 2
Center frequency 3
Range of Center frequency 3 (*The larger the value, the narrower the width)
Amplification/attenuation at the Center frequency 3
Center frequency 4
Range of Center frequency 4 (*The larger the value, the narrower the width)
Amplification/attenuation at the Center frequency 4
Output level
Descriptions
—
—
All center frequencies are shifted.
Descriptions
—
—
—
All center frequencies become higher as strike force increases.
Amplification at all center frequencies is more intensively as strike force in-
creases.