2
HOW TO USE THE RX HISTORY
Save the destination call sign into your call sign
STEP 2
memory from the RX History (Continued)
Push D-pad(
) to select
t
"NAME," and then push D-
pad(Ent).
• A cursor appears and blinks.
D-pad
(Ent)
(�)
Rotate [DIAL] to select a
y
desired character to enter a
name of up to 16 characters,
including spaces.
23
About text entry
• Push D-pad() to move the
cursor backward or forward.
• While selecting a character,
push [QUICK]
the character to an upper case
or lower case letter.
• While selecting a digit, push
[QUICK]
mode selection window.
- Push D-pad() to select
- To enter symbols, select "!"#," and then push D-pad(Ent)
• A space can be selected, in any input mode selected.
• Move the cursor, then rotate [DIAL] to insert a character.
• Rotate [DIAL] counterclockwise to enter a space.
• If you make a mistake, push [CLR]
Go to step u
lected character, symbol or number, or hold down [CLR]
to continuously erase the characters, first to the right, and
then to the left of the cursor.
to change
to open the input
the desired Upper case let-
ters, Lower case letters, Numbers or Symbols.
to open the symbol character selection window. And ro-
tate [DIAL] to select the desired symbol character, and
then push D-pad(Ent).
Input mode selection
window
to delete the se-