Icom ID-51A Basic Instructions page 4

PREPARATION
Push D-pad( ) to select MY
t
call sign memory channel "1"
([MY1]).
D-pad
(Ent)
(�)
Push [QUICK]
y
push D-pad() to select
"Edit." Then, push D-pad(Ent)
to enter the call sign edit
mode.
• A cursor appears and blinks.
Rotate [DIAL] to select the
u
first digit. (Example: J)
• A to Z, 0 to 9, / and (Space) are
selectable.
• Cursor move: Push D-pad().
• Delete: Push [CLR]
• Insert: Move cursor, then rotate
[DIAL].
• Rotate [DIAL] counterclockwise
to enter a space.
Keys used for input
Selects/exits the
MENU screen
Moves the
cursor
3
, and then
.
Go to step o
[DIAL]
Selects
Deletes
Shows the
QUICK MENU
Push D-pad() to move the
i
cursor to the second digit.
NOTE: Your call sign must
match the call sign registered
to your gateway repeater. (p. 4)
Repeat steps
o
enter your own call sign of
up to 8 characters, including
spaces.
( For example: First J, then A,
then 3, then Y, then U, then A)
!0 Push D-pad(Ent) to set the
call sign.
• See next page if you enter a
note.
Edit mode
!1 Push D-pad(Ent) again to
save and return to the MY
CALL SIGN screen.
• Two beeps sound.
!2 Push [MENU]
MENU screen.
u and i to
to exit the
Completed
Beeps