Step2 Hold Down [Ptt] To Transmit; Making A Simplex Call - Icom ID-51A Basic Instructions

Push D-pad( ) to select "25:
e
Simplex," and then push D-
pad(Ent).
Push D-pad( ) to select
r
"433.450," and then push
D-pad(Ent).
• "433.450" is displayed
"FROM."
• "CQCQCQ" is displayed in "TO."
- If a station call sign is set in
"TO", select "Local CQ" in the
TO SELECT screen to set
"TO" to "CQCQCQ."
in

MAKING A SIMPLEX CALL

STEP 2 Hold down [PTT] to transmit
While holding down [PTT],
q
speak at your normal voice
level.
• The TX/RX indicator lights red.
• The S/RF meter shows the
transmit output power level.
Release [PTT] to receive.
w
When you make a simplex call in
the VFO mode, the LCD chang-
es as shown to the right.
NOTE: The simplex frequencies can be changed in the
MENU screen. See the PDF type Advanced Instruction
section 9 for more details.
(MENU > DV memory > Repeater List)
7
Transmitting
7
34