Connecting The Camera To A Pc - Ricoh RDC-6000 Operation Manual

Connecting the Camera to a PC

Use the cable supplied when connecting the RDC-6000 to a personal computer.
q Turn off the personal computer power.
w Make sure the power of this device is off and then use the indicated
cable to connect to the personal computer.
Note
• Avoid using the camera battery whenever possible. Use the AC adapter
instead. If the power fails during operation, it will be necessary to repeat.
• Do not connect the AC adapter while the camera power is on.
Typical Windows connection
Typical Macintosh connection
e Turn on the digital camera power and set
the camera mode dial to [
r Turn on the personal computer power
and start the utility software.
92
].