Shooting - Ricoh RDC-6000 Operation Manual

Shooting

Basic shooting instructions are given below. Hold the camera correctly to keep it
steady.
q Aim the camera at your subject.
Use macro mode to shoot subjects when the
distance to it is about 13 – 30 cm (5 – 12 inches)
"Focus Modes" (p.61)
See
w Press the
of the subject.
"Digital Zoom" (p.44)
See
"How to View Images on the LCD
Monitor" (p.45)
e Press the shutter release button lightly
with your fingertip.
The shutter release button works in a two-step
action. When you press it lightly (halfway), the
autofocus function is triggered to focus on the
subject automatically. Keep the camera as
steady as possible during this step to ensure
correct focusing.
When the subject is in sharp focus, the
autofocus LED will light green and focus,
exposure and white balance will be locked.
When the flash LED lights
When the flash fires while taking photographs in
dark places, etc., the flash LED will light red
when the release button is pressed lightly.
During charging, the flash LED will blink and the
display on the LCD monitor will disappear.
Photographs cannot be taken at this time.
46
or button to set the size
1600 F
10:12 2000/05/15
7