Turning On The Camera - Ricoh RDC-6000 Operation Manual

Turning on the Camera

Slide the camera power switch to the right to turn the power on.
• The camera can be turned off when anything emitting magnetic force
Important
Note
comes close to it.
Keep it out of the camera.
q Slide the power switch to on.
• Sliding the power switch again will turn off
the power.
w Set the mode dial to [
The LCD panel or the LCD monitor will display
recording information.
LCD Monitor Display
Press the DISPLAY button to switch displays appearing on the LCD monitor. If the
LCD monitor is not used, press the DISPLAY button to save the batteries. Press the
DISPLAY button again to enable the LCD monitor.
You may set the camera to come up with the LCD monitor disabled when it is powered
on. See "Changing the LCD Setting" (p.99).
Auto Power-Off
Tips
The camera will turn off automatically (auto power-off) to conserve the
battery if it is left idle (no buttons, switches or other controls operated) for
fixed time. To resume use, turn the power on again.
You can disable the auto power-off mode.
See "Auto Power Off Setting" (p.95).
The auto power-off mode does not function when the camera is
powered by an AC adapter.
• If the keep settings function is enabled, the flash, exposure compensation,
Note
white balance, recording mode, language, ISO setting, focus, auto bracket
grid template, Exposure mode and redeye reduction in effect just before the
camera was turned off are saved. See "Keep settings" (p.94).
].
2
41