Ricoh RDC-6000 Operation Manual page 115

Problem
Display shut off Dead battery
Auto power-off activated
Remote control Obstruction between the remote
control unit and camera sensor
unit will not
work
Dirty remote control transmitter or
camera sensor
Dead remote control batteries
LCD monitor Area captured by autofocus field
brightness and the surrounding area have
changes during contrasting light levels or the
autofocus entire subject is dark.
operation
Phenomenon occurring with
Vertical lines
pictures of bright subjects, known
appear on
as the smudge phenomenon
image
Miscellaneous
Problem
SmartMedia Wrong type of SmartMedia
memory card memory card
will not fit into
SmartMedia memory card
slot
incorrectly oriented
Dead battery
Camera will not
operate even
Camera malfunction
when buttons
and switches
are
manipulated
Date and time
Date and time setting is incorrect
are wrong
Date and time
Battery removed
were set but
disappeared
File won't erase
Camera not set to erase mode
or SmartMedia
Write protect pad on SmartMedia
memory card
memory card
won't format
File protected
Power switch off or auto power-
off activated.
Mode settings
Batteries have been removed
have changed
Auto power-off
Auto power-off setting is disabled
will not activate
Camera powered by AC adapter
(auto power-off is automatically
disabled when powered by an AC
adapter)
No image on
The television system setting is
the TV screen
incorrect.
Cause
Recharge battery.
Slide power on again.
Remove the obstruction. (Sensor is on
the left side of the lens.)
Clean with a soft dry cloth.
Replace CR2032 lithium batteries.
There is no malfunction.
There is no malfunction. Never shoot the
Sun, etc.
Cause
Use a SmartMedia memory card specified
for the camera.
Insert the SmartMedia memory card the
correct way.
Recharge battery.
Slide the power off and on once. Turn
the mode dial to [
problem persists, (1) reset the camera by
sliding the power switch after removing
the main batteries, and (2) reinstall the
batteries and try to operate the camera
again.
Reset the date and time.
The date setting is reset if the battery has
been removed for about 3 minutes or
longer. Set the date again.
Turn the mode dial to [
Remove pad from SmartMedia memory
card.
Use the play menu to reset the file's
protection setting.
Slide power on and retry.
Reset keep setting.
Enable setting.
Select the correct television system.
Solution
Solution
] or [ ]. If the
].
–
Page
25
41
–
–
–
–
–
Page
30
30
25
–
33
34
86
29
80
41
94
95
–
97
113