Changing Lcd Confirmation; Changing The Lcd Setting - Ricoh RDC-6000 Operation Manual

e Press the MENU
between [NTSC] and [PAL].
The video system setting is updated.
When the setting is complete, set the mode dial
to select another mode.
• The LCD monitor would appear blank when the video cable is inserted.
Note

Changing LCD Confirmation

When you press the shutter release button to take a picture, the shot image appears
on the LCD monitor, accompanied by a beep, before it is recorded. You can select the
image confirmation time from among 0 second, 1 second, 2 seconds, and 3 seconds.
q Set the mode dial to [SET].
w Press the
CONFIRMATION].
e Press the MENU
the image confirmation time (1 sec., 2
sec., 3 sec., OFF).
When the setting is complete, set the mode dial
to select another mode.
• The initial value is 1 sec.
Note
• Images are not displayed when the
image confirmation time is set to OFF.
The images are recorded immediately
after the photograph is taken.
98
button and select
Change
or button to select [LCD
button and select
Change
MENU[SET UP]
FORMAT
DATE SETTING
KEEP SETTINGS
AUTO POWER OFF
AUTO LCD OFF
LANGUAGE
VIDEO OUT MODE
PAL
Change
MENU[SET UP]
LCD CONFIRMATION
LCD SETTING
INITIALIZE SETTING
SEQUENTIAL NO.RESET
1SEC.
Change
MENU[SET UP]
LCD CONFIRMATION
LCD SETTING
INITIALIZE SETTING
SEQUENTIAL NO.RESET
2SEC.
Change
1/2
2/2
2/2