Setting Exposure Compensation; Setting The Focus - Ricoh RDC-6000 Operation Manual

Setting Exposure Compensation

q Press the EV (+/–) button.
w Set the exposure compensation level
using the FWD ( ) or REV ( ) button
and press the RELEASE button to take
the picture.
To cancel the setting
Use the procedure in step w to set the
compensation value to [±0.0 ].

Setting the focus

q Press the Erase button and set the focus
mode.
Each time the Erase button is pressed, the focus
mode will change.
w Focus mode operation is as shown in
the table (operation button allocation)
below.
Body button name
CANCEL
ENTER
e Press the release button to take the
picture.
To cancel the setting
Press the Erase button to end focus mode
setting.
102
Remote control button name
MULTI
ENTER
FWD ( )
REV ( )
RELEASE
ERASE FWD PROGRAM
EV
ENTER
REV
MULTI
RELEASE
ERASE FWD PROGRAM
EV
ENTER
REV
MULTI